Peavey DX14 HF Compression Driver

The Peavey DX™ 14 High Frequency Driver is a top - notch direct replacement for the Peavey DM 112 and DM 115 enclosures. It features a 1.35 - inch (34.3 mm) voice coil diameter and a throat parameter of.962 (24.4 mm). With a nominal impedance of 8 Ohms, it offers stable performance. It can handle high power, with a peak power capacity of 140 W from 2000 Hz to 20,000 Hz. The driver has a high sensitivity of 103 dB / 1W 1m on - axis on a 90(deg) H x 40(deg) V horn and a nominal efficiency of 28%. Its frequency response ranges from 1.0 Hz to 20,000 Hz, and the recommended crossover is 2000 Hz at 12 dB / Octave. The diaphragm is made of titanium, and the voice coil uses copper - clad aluminum wire on a high - temp Kapton bobbin. It has dimensions of 3.44 (87.3 mm) diameter x 2.44 (62 mm) depth and a standard 1 3/8 - 18 horn coupling thread.

Using the Peavey DX14 High - Frequency Compression Driver is quite straightforward. First, make sure it's properly installed in the Peavey DM 112 or DM 115 enclosures. Connect it to your audio system following the correct wiring instructions. When using, set the crossover frequency as recommended, around 2000 Hz at 12 dB / Octave. For safety, don't exceed the power capacity to avoid damaging the driver. As for maintenance, keep it clean and dry. Avoid exposing it to extreme temperatures or humidity. Regularly check the connections to ensure they are secure. If you notice any abnormal sounds or performance issues, stop using it immediately and have it inspected.