MXR M239 Mini Iso-Brick

The MXR Mini Iso - Brick Power Supply is a game - changer! It provides quiet, noise - free DC power to a wide variety of pedal types, and it's smaller than a candy bar. Ideal for your travel board or when you just need to power a select few pedals. It has five fully isolated outputs to get rid of those annoying ground loop noises that can end your gig. Four outputs offer 9 volts at 300mA, and the fifth can be set to 9 or 18 volts at 800mA according to your needs. With plenty of current and the ability to handle both negative and positive grounds, it can power almost any analog or digital pedal. Don't worry about the five - output limit. It comes with a splitter cable. You can connect two pedals to one output as long as they need the same voltage and you don't go over the current rating. You can do this with all outputs at once by buying extra cables. And on dark stages, the built - in LEDs let you know your connections are good. Its lightweight yet tough housing ensures your pedalboard stays powered gig after gig.

Using the MXR Mini Iso - Brick Power Supply is easy. First, decide which voltage you need for each pedal. You can set the fifth output to 9 or 18 volts based on your pedal's requirements. Connect your pedals to the outputs. If you have more pedals than outputs, use the splitter cable to connect two pedals to one output, but make sure they need the same voltage and don't exceed the current rating. When you're on stage, the LEDs will show if your connections are solid. As for maintenance, keep it in a dry place. Wipe it with a clean, dry cloth if it gets dirty. Don't expose it to extreme temperatures or moisture. And if you're not using it for a long time, unplug it to save energy.